On this page

How to use the countertop calculator in four steps

  1. Choose inches or centimetres.
  2. Add each piece: a straight run, an L-shape or an island.
  3. Enter the length and depth of each piece, measured to the front edge.
  4. Check the total: the calculator shows each piece and the corner it took away.

Not sure how to measure? Our guide to measuring countertops shows each step, and our guide to the standard kitchen countertop height covers the height the top sits at.

The calculator counts each corner only once

For each piece it multiplies the length by the depth. On an L-shape it adds both legs and takes the shared corner away once. Then it adds up the pieces and shows square feet and square metres.

It works in your browser and does not send your measurements anywhere.

Three worked examples to try

Load an example, then change any number to match your kitchen.

ExamplePiecesArea
Straight run120 × 25.5 in21.25 sq ft
L-shape300 × 60 + 240 × 60 cm, corner once2.88 m²
L-shape and island2.88 m² + 180 × 90 cm4.50 m²

Source: BTTR Space worked examples, following the Lowe’s and Home Depot measuring method. Checked September 2026.

What the countertop calculator does not do

The calculator adds up flat worktop areas. It does not:

  • count how many slabs to buy;
  • price the material or the cut-outs;
  • handle curves or angled ends;
  • include upright pieces such as a backsplash or a waterfall end.

Take your saved result to the supplier, who will make the final template.

Common problems with the total, and how to fix them

What you seeWhy it happensWhat to do
The total looks too bigThe corner was counted twiceUse the L-shape piece, or pieces that do not overlap
The numbers look wrongInches and centimetres were mixedPick one unit before you start
The island is missingIt was not addedAdd it as its own piece
The quote is differentSuppliers price slabs and cut-outs their wayAsk how they price before comparing

Source: how the BTTR Space countertop calculator works. Checked October 2026.

To check whether an island fits your room, use the island size calculator and see the space an island needs around it.

Quick questions

Should I enter metres or centimetres?

Centimetres. Enter 300 for a 3 metre run. In inches, enter 126 for 10 feet 6 inches.

Are backsplash and waterfall panels included?

No. The calculator is for flat worktops. Keep upright pieces on a separate list so the worktop total stays clear.

Can it tell me how many slabs to buy?

No. Slab size, the pattern and where pieces can join all change how many you need. Your supplier works that out from your measurements.

Do I take the sink opening off the total?

The calculator shows it separately. The full area is what you measured, and the supplier decides how openings affect the price.

How we check

We take every clearance from published planning guidelines and manufacturer guides, and record the page and the date we checked it. Our examples are drawn to scale from the dimensions they state. They are planning examples, not approvals for installation: services, fixings and local rules need your designer or installer. Our editorial policy.

Sources2 published guidelines and guides behind this page

Numbered in order of first use.

  1. Kitchen Countertop Measure Guide, Lowe’s. Checked 21 September 2026.
  2. Countertop Project Estimation Worksheet (form dated 06/05), The Home Depot. Checked 21 September 2026.

The worked examples are BTTR Space’s own. The calculator measures flat surfaces only: joins, edges, supports and prices come from the supplier.